Dutch M95 Carbine barrel extension

This is the forum for general Milsurp gun topics that don't fit some place else.

Moderator: Niner

Post Reply
USDF
Posts: 20
Joined: Mon Jun 07, 2004 10:11 pm
Location: SLC, Utah

Dutch M95 Carbine barrel extension

Post by USDF » Thu Mar 19, 2009 11:45 pm

I've noticed several carbines at gunshows that have a short extension (1 1/2") on the end of the barrel & other carbines don't. Was this for some pre-1968 short barrelled rifle regulation or what?
"If you run, you'll only die tired"
1886lebel
Sustaining Member
Posts: 242
Joined: Sat Jun 04, 2005 8:57 pm

Re: Dutch M95 Carbine barrel extension

Post by 1886lebel » Fri Mar 20, 2009 8:02 am

These extensions were flash hiders with special bayonet lugs as used on the Indonesian converted ex-Dutch KNIL Rifle and Carbines that was done in the 1953 and 1954 at Jakarta Arsenal and other arsenals. The Carbines were converted to 7.7x56Rmm (.303 British)
Indonesian markings: a Five Point star, the date (1953 or 1954) and the calibre (7,7) on the receiver ring and most times on the left side of the receiver.

Image
Vive la République Française, le Lebel et le poilu
Verdun 1916: "Ils ne Passeront pas" "On les aura!"
Fusil d'Infanterie Modèle 1886 Modifié 1893 dit "Lebel"

Vive le Pinard !
http://www.youtube.com/watch?v=axfM1sFqIK0
USDF
Posts: 20
Joined: Mon Jun 07, 2004 10:11 pm
Location: SLC, Utah

Re: Dutch M95 Carbine barrel extension

Post by USDF » Tue Mar 31, 2009 11:14 am

The two I've seen are carbines in 6.5 caliber and threaded for 1/2" in front of the front sight with a plain smooth 1 1/2" extension (same diameter as the barrel) silver soldered onto the barrel.
"If you run, you'll only die tired"
Post Reply