Got an M1 Carbine today
Got an M1 Carbine today
It's not a "real" one. Not a military issue but one made by Universal. But I didn't pay but about half as much for it either. Maybe I should have held out for a more collectable model, but I couldn't turn it down.
- joseyclosey
- Moderator
- Posts: 3916
- Joined: Mon Oct 06, 2003 2:48 pm
- Location: UK
Looks like it's an early one too. Take off the stock, if there's only one operating slide spring, that's good. That means it is an early copy. Two is bad. A stamped op slide is bad too.
The stock is kind of odd looking. I wonder if somebody decided to refinish it and lost interest.
The stock is kind of odd looking. I wonder if somebody decided to refinish it and lost interest.
Spelling and grammar always count.
Took it for a test run today
A real hoot! Shot a real tight group at short distances. Took some adjusting to move the point of aim to the center of the target. But by the time I shot up most of the $16 worth of Ammo it was there. I ordered some more for half the price when I got home.
Sunray, didn't know exactly what you meant by two springs on the op slide, but if this is what you meant in the pictures, guess there is only one spring. The operation handle and rod look machined too.
Sunray, didn't know exactly what you meant by two springs on the op slide, but if this is what you meant in the pictures, guess there is only one spring. The operation handle and rod look machined too.
"...if this is what you meant in the pictures..." Exactly. You have an early model in great condition. You should be able to use most milsurp parts should you ever need any. Mind you, I've never had to change any part on my Plainfield in the 30 years I've had it. Never had a lick of trouble a bath didn't fix.
If you're reloading(if you're not you will be sooner or later), Speer 110 grain HP's with IMR4227 work extremely well. My Plainfield's load of 14.5 grains is accurate and will blow a hole in a ground hog the size of a grapefruit. 13.5 to 15.0(compressed) of IMR 4227. Carbide sizing die and mostly Winchester brass. Milsurp ammo has never been readily available in Canada. Wouldn't use it anyway. Handloads only.
If you're reloading(if you're not you will be sooner or later), Speer 110 grain HP's with IMR4227 work extremely well. My Plainfield's load of 14.5 grains is accurate and will blow a hole in a ground hog the size of a grapefruit. 13.5 to 15.0(compressed) of IMR 4227. Carbide sizing die and mostly Winchester brass. Milsurp ammo has never been readily available in Canada. Wouldn't use it anyway. Handloads only.
Spelling and grammar always count.