Shot sitting, supported - not bench rest though!
DISTANCE: 100mtrs.
The load was:
CASE: RWS.
BULLET: PRIVI PARTIZAN HPBT 175 grains. NO CRIMPING. SEATING DEPTH 8.25mm
POWDER: SNPE 'VECTAN' TUBAL 5000.
LOAD: 3.2 grammes / 49.376 grains.
PRIMER: CCI 200 LARGE RIFLE
http://i51.photobucket.com/albums/f392/ ... /1-WEB.jpg[/pic]
http://i51.photobucket.com/albums/f392/ ... /2-WEB.jpg[/pic]
http://i51.photobucket.com/albums/f392/ ... /3-WEB.jpg[/pic]
http://i51.photobucket.com/albums/f392/ ... /4-WEB.jpg[/pic]
http://i51.photobucket.com/albums/f392/ ... /5-WEB.jpg[/pic]
OBSERVATIONS:-
Quite a heavy recoil and bearing in mind that I could not get a clear sight because of my glasses I am quite pleased with the results.
Intend to reduce the load to 3.10 & 3.0 grammes for the next 20 loads and to wear slightly thicker clothing!
Should get a foresight adjustment tool from a friend this week (made to order) and possibly an aperture rear sight which I am sure will improve the grouping.
Will post photos when they arrive.
FIRST RE-LOADS DOWN THE RANGE.
Moderator: joseyclosey
- DuncaninFrance
- Global Moderator Sponsor 2011-2017
- Posts: 10951
- Joined: Fri Oct 06, 2006 3:08 pm
- Location: S.W.France
- Contact:
FIRST RE-LOADS DOWN THE RANGE.
Duncan
What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
Not too bad Duncan, a bit of fettling and you'll be on course.It might take a bit of trial and error, but you'll soon work up a decent load. Those Mausers can kick a bit, especiallly if you're wearing light clothing. My 03A3 is the same and now I wear a lot of padding. The last time I fired it with no padding I swear I could hear the pins in my shoulder rattling!!!!!!!
Ian
Ian
- DuncaninFrance
- Global Moderator Sponsor 2011-2017
- Posts: 10951
- Joined: Fri Oct 06, 2006 3:08 pm
- Location: S.W.France
- Contact:
WELL HERE IS THE FORESIGHT ADJUSTER TOOL
Made from the same design as one I saw for a Mosin a short while ago by a friend of mine who told me that he 'found it' inside a piece of metal he discovered in his workshop. Wish I could make things that well in metal.
http://i51.photobucket.com/albums/f392/ ... ol-web.jpg[/pic]
Just needs a polish with some wire wool and perhaps another dip in the Bluing liquid.
http://i51.photobucket.com/albums/f392/ ... ol-web.jpg[/pic]
Just needs a polish with some wire wool and perhaps another dip in the Bluing liquid.
Duncan
What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.