THIS IS CATCHING!
Moderator: blackisler
Coal burners are psychologically sophisticated shotguns I'll have you know.
You never see your misses so the humiliation is less.
Now just so that there is no confusion in future, this what a proper shotgun looks like
Note the barrels properly aligned with the stock:
http://img.photobucket.com/albums/1003/ ... 0Bore2.jpg[/pic]
Proper man sized bore 10 gauge:
http://img.photobucket.com/albums/1003/ ... 0Bore1.jpg[/pic]
Two hammers and two triggers, one of each for the left barrel and one each for the right:
http://img.photobucket.com/albums/1003/ ... 0Bore3.jpg[/pic]
Tasteful and unobtrusive hand engraving:
http://img.photobucket.com/albums/1003/ ... 0Bore4.jpg[/pic]
Elegant fore-end:
http://img.photobucket.com/albums/1003/ ... 0Bore5.jpg[/pic]
Refined non ejecting extractors:
http://img.photobucket.com/albums/1003/ ... 0Bore6.jpg[/pic]
Intricate Damascus barrels:
http://img.photobucket.com/albums/1003/ ... 0Bore7.jpg[/pic]
Locally made in Co Durham:
http://img.photobucket.com/albums/1003/ ... 0Bore8.jpg[/pic]
Price a year ago, a smidgen more than Duncan's gun.
You never see your misses so the humiliation is less.
Now just so that there is no confusion in future, this what a proper shotgun looks like
Note the barrels properly aligned with the stock:
http://img.photobucket.com/albums/1003/ ... 0Bore2.jpg[/pic]
Proper man sized bore 10 gauge:
http://img.photobucket.com/albums/1003/ ... 0Bore1.jpg[/pic]
Two hammers and two triggers, one of each for the left barrel and one each for the right:
http://img.photobucket.com/albums/1003/ ... 0Bore3.jpg[/pic]
Tasteful and unobtrusive hand engraving:
http://img.photobucket.com/albums/1003/ ... 0Bore4.jpg[/pic]
Elegant fore-end:
http://img.photobucket.com/albums/1003/ ... 0Bore5.jpg[/pic]
Refined non ejecting extractors:
http://img.photobucket.com/albums/1003/ ... 0Bore6.jpg[/pic]
Intricate Damascus barrels:
http://img.photobucket.com/albums/1003/ ... 0Bore7.jpg[/pic]
Locally made in Co Durham:
http://img.photobucket.com/albums/1003/ ... 0Bore8.jpg[/pic]
Price a year ago, a smidgen more than Duncan's gun.
- DuncaninFrance
- Global Moderator Sponsor 2011-2017
- Posts: 10948
- Joined: Fri Oct 06, 2006 3:08 pm
- Location: S.W.France
- Contact:
DON'T ENCOURAGE HIM!!!
Adam, that is one very nice piece of history you have there, I thank you for the pictures. Wild haggis ( Haggie?) would not have stopped you posting them after blackisler fed you the chance I suspect.Perhaps Adam would like to add a comment about the merits of the coal burner he likes to use
I can't hit a country with a S/S let alone a clay and I have to say that I much prefer a plain rather than engraved piece.
Have a look here, http://www.larquebusier.com He buys actions from Italy and makes beautiful guns with them.
I may have said this before but my favorite shotgun was an original (not Webley) WW Greener GP that I stupidly sold in the UK some years ago.
Duncan
What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
Greener GP
A friend has a Greener GP MkII that he bought new about thirty years ago and has hardly ever shot. I had a look at it a couple of months ago and it looked brand new, not a mark on it.
Regards
Peter.
Regards
Peter.
- blackisler
- Moderator Sponsor 1911,12,13,14,15,16
- Posts: 502
- Joined: Fri Nov 12, 2004 4:04 pm
- Location: Scotland
- Contact:
I have to digress to Adams superb defence of the magnificant side by side 10 bore , A true man size shotgun [obviously made for a scot] .
However it is slightly over kill when shooting pigeons or rabbits[ there would not be much left to eat ] also I would think it could be rather expensive to shoot clays with. I still prefer the over under configuration for shooting clays and pheasants with.
Robert
However it is slightly over kill when shooting pigeons or rabbits[ there would not be much left to eat ] also I would think it could be rather expensive to shoot clays with. I still prefer the over under configuration for shooting clays and pheasants with.
Robert
live life for today as tomorrow may never come
- DuncaninFrance
- Global Moderator Sponsor 2011-2017
- Posts: 10948
- Joined: Fri Oct 06, 2006 3:08 pm
- Location: S.W.France
- Contact:
WOKE UP THE NEIGHBOURS YESTERDAY!
I loaded up 6 brass cases yesterday ( 3 with 7½ and 3 with 6 ) and shot a couple of 'pattern plates', 200mtr target board covered in wallpaper! At 30 mtrs I was getting a good pattern and after comparing it with a modern cartridge it was obvious that the brass loads would be fine for clays.
I am now waiting for Buffalo Arms to give me a price for 2 boxes shipped to France and we are in business
I am now waiting for Buffalo Arms to give me a price for 2 boxes shipped to France and we are in business
Duncan
What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
- blackisler
- Moderator Sponsor 1911,12,13,14,15,16
- Posts: 502
- Joined: Fri Nov 12, 2004 4:04 pm
- Location: Scotland
- Contact:
- DuncaninFrance
- Global Moderator Sponsor 2011-2017
- Posts: 10948
- Joined: Fri Oct 06, 2006 3:08 pm
- Location: S.W.France
- Contact:
I AM SURE THAT IT IS
However, the Brass Cases are loaded with Black Powder not Smokeless because there is a range in Bordeaux that has a Clay Bird setup but ONLY for BP.
It seemed a sensible idea to buy a gun that I could shoot both with because there is no Clay Club as such in this part of France. The only clay shoots are in the summer, run by the local Hunt Associations. They are called 'Ball Trap' and are normally only for one day.
It seemed a sensible idea to buy a gun that I could shoot both with because there is no Clay Club as such in this part of France. The only clay shoots are in the summer, run by the local Hunt Associations. They are called 'Ball Trap' and are normally only for one day.
Duncan
What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
- DuncaninFrance
- Global Moderator Sponsor 2011-2017
- Posts: 10948
- Joined: Fri Oct 06, 2006 3:08 pm
- Location: S.W.France
- Contact:
WHAT A LEMON!
Last weekend I was able to go and shoot some DTL with this Marocchi and the triggers lasted for almost 20 rounds before the front one almost fell off!
On Wednesday I took it back to the dealer where I bought it and after 2 hours waiting for their gunsmith ( I use the term loosely ) to sort the problem I was told that it could not be repaired easily.
As they had 3 more versions of this shotgun on the shelves at the same price that I paid, all with loose triggers, I demanded a re-fund or a replacement with another gun.
After waiting for the boss for another 30 mins I agreed to exchange for this and some shells.
http://i51.photobucket.com/albums/f392/ ... 599020.jpg[/pic]
Built like a brick sh#*$ouse with 3 chokes and a selective ejector/non ejector. Stock is walnut (not French) but it mounts well and will serve me well for DTL.
I just wish I still had my Greener GP
On Wednesday I took it back to the dealer where I bought it and after 2 hours waiting for their gunsmith ( I use the term loosely ) to sort the problem I was told that it could not be repaired easily.
As they had 3 more versions of this shotgun on the shelves at the same price that I paid, all with loose triggers, I demanded a re-fund or a replacement with another gun.
After waiting for the boss for another 30 mins I agreed to exchange for this and some shells.
http://i51.photobucket.com/albums/f392/ ... 599020.jpg[/pic]
Built like a brick sh#*$ouse with 3 chokes and a selective ejector/non ejector. Stock is walnut (not French) but it mounts well and will serve me well for DTL.
I just wish I still had my Greener GP
Duncan
What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
- joseyclosey
- Moderator
- Posts: 3916
- Joined: Mon Oct 06, 2003 2:48 pm
- Location: UK