Reels for developing

I started this forum for any collecting hobby and it turned into my camera collecting and using forum. I use it mostly to keep a record of my photo adventures. Nobody but me seems to have photo adventures that visit here....but however. I have so many cameras now that I forget which is which and which ones work and which ones don't. If you have cameras and adventures you would be welcome to post here.

Moderator: DuncaninFrance

User avatar
Niner
Site Admin
Posts: 11519
Joined: Sat Mar 15, 2003 1:00 pm
Location: Lower Alabama

Reels for developing

Post by Niner » Sat Feb 25, 2017 1:13 pm

I noticed Duncan has what looks to be the state of the art, up to the minute, reels. Dual 35mm reels are handy for doing two rolls of film at a time and it probably comes apart and makes the bottom one adjustable to 120.

Reels have been around as long as there has been film in strips. The traditional reels are steel and you load the reel by first pinning the lead end of the film to the center axis and load from the inside the reel out slightly curving the edge of the film with your fingers as you go. Works... but difficult to load in changing bag. Then there is the plastic "Kit" with the film started to the outside edge under two miniscule tabs and then by pushing under a couple of tiny ball bearings to start it. Then you would twist the outside frame wheels back and forth, about an inch at a time. and the film would load. The plastic reel adjusts to different film sizes by expansion groves in the plastic tube that is the axle between the two wheels. This too is difficult to load in a dark bag and often jambs or gets off track as the film can get out of the track during the critical early loading stage. Then.. the best one came along that looks not much different except for two critical things. The first thing is the wide thumb friendly tabs at the film entrance and the flat roof area to the critical first loading to keep the film from jumping off track is the second. No twisting and alignment problem going onto the reel which is the number one cause of aggravation. The film goes in straight and the tabs are easy to find in the dark bag by only touch.
Attachments
steel both with canister.jpg
steel both from top.jpg
120 steel center.jpg
35mm center steel.jpg
side.jpg
35mm both.jpg
User avatar
DuncaninFrance
Global Moderator Sponsor 2011-2017
Posts: 10933
Joined: Fri Oct 06, 2006 3:08 pm
Location: S.W.France
Contact:

Re: Reels for developing

Post by DuncaninFrance » Sat Feb 25, 2017 2:19 pm

Yes Robert,they are adjustable so I can process 120 film.

I was going to buy a changing bag but it just struck me that my workshop is lightproof so I wont have to bugger about in the confined space of a bag which should make loading the film much easier. :lol: :lol:
Duncan

What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
User avatar
Niner
Site Admin
Posts: 11519
Joined: Sat Mar 15, 2003 1:00 pm
Location: Lower Alabama

Re: Reels for developing

Post by Niner » Sat Feb 25, 2017 2:45 pm

Now that's a good thing. That should make things go faster.
User avatar
DuncaninFrance
Global Moderator Sponsor 2011-2017
Posts: 10933
Joined: Fri Oct 06, 2006 3:08 pm
Location: S.W.France
Contact:

Re: Reels for developing

Post by DuncaninFrance » Sat Feb 25, 2017 3:14 pm

All I need now are some chemicals......... :razz:
Duncan

What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
User avatar
DuncaninFrance
Global Moderator Sponsor 2011-2017
Posts: 10933
Joined: Fri Oct 06, 2006 3:08 pm
Location: S.W.France
Contact:

Re: Reels for developing

Post by DuncaninFrance » Sat Feb 25, 2017 4:54 pm

YES! Found a supplier in France that ONLY deals with film..........chemicals on their way :bigsmile:
Duncan

What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
User avatar
Niner Delta
Global Moderator Sponsor 2011-2017
Posts: 4866
Joined: Fri Apr 09, 2004 10:51 pm
Location: Sequim, WA

Re: Reels for developing

Post by Niner Delta » Sat Feb 25, 2017 5:40 pm

Can you really use a red light to see in a darkroom, or is that just in the movies??

.
:USA:

Peace is that brief, quiet moment in history.......... when everybody stands around reloading.
User avatar
Niner
Site Admin
Posts: 11519
Joined: Sat Mar 15, 2003 1:00 pm
Location: Lower Alabama

Re: Reels for developing

Post by Niner » Sat Feb 25, 2017 8:37 pm

Safe lights in red or amber can be used in printing some B&W printing, depending on the paper, and for various dark room tasks and adjustments with the enlarger. During actual exposure to the paper it should be turned off theoretically. Red or amber light use is possible because of limited sensitivity to the light color spectrum in B&W print paper. It's not something I'd use in developing negatives.
User avatar
DuncaninFrance
Global Moderator Sponsor 2011-2017
Posts: 10933
Joined: Fri Oct 06, 2006 3:08 pm
Location: S.W.France
Contact:

Re: Reels for developing

Post by DuncaninFrance » Sun Feb 26, 2017 5:24 am

When loading a film onto a spool it has to be in total darkness.
The way to check this is to place a piece of photographic paper in the area where you work in the dark room. Leave it there for say 5 minutes then develop it in the chemicals as though it had been normally exposed on the enlarger.
It there is any light leaking into the darkroom it will show on the developed paper...........
Duncan

What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
User avatar
DuncaninFrance
Global Moderator Sponsor 2011-2017
Posts: 10933
Joined: Fri Oct 06, 2006 3:08 pm
Location: S.W.France
Contact:

Re: Reels for developing

Post by DuncaninFrance » Mon Feb 27, 2017 12:07 pm

I thought it would be a good idea to check the workshop for light leak :shock: it's like a bloody sieve :roll: So is the wine store BUT we have a small bathroom which is part of the upstairs guest room and that is like the Black Hole of Calcutta :) :)
Duncan

What contemptible scoundrel has stolen the cork to my lunch? -- W.C. Fields
"Many of those who enjoy freedom know little of its price."
You can't fix Stupid, but you can occasionally head it off before it hurts something.
User avatar
Niner
Site Admin
Posts: 11519
Joined: Sat Mar 15, 2003 1:00 pm
Location: Lower Alabama

Re: Reels for developing

Post by Niner » Mon Feb 27, 2017 1:49 pm

Photo chemicals in small unventilated or poorly ventilated small bathrooms can cause health problems ....so be careful. Years ago...35 or so...I used such a bathroom to do photo work. leaning over trays of chemicals in a bathtub making prints I developed a sore throat from hell and went to the EENT doc and he said my throat looked just like it looks just before cancer shows up. Scared the crap out of me and ..thinking it was smoking causing it... gave up cigarettes at once. Only later did I learn it was the chemical fumes in a confined place. All things considered it was probably a good thing in how things turned out. :D
Post Reply