Page 3 of 4

Re: WORKSHOP REFIT...............

Posted: Thu Oct 15, 2015 3:33 pm
by Niner Delta
Looks nice, even though it will crack without any expansion joints, but indoors it won't matter.
I poured a patio deck with a small mixer like that years ago, keeps you real busy.......... :mrgreen:
Is the white line, running under and coming up at both ends, electrical?
What a great shop you have now, I am green with envy.

Re: WORKSHOP REFIT...............

Posted: Thu Oct 15, 2015 5:23 pm
by DuncaninFrance
Robert. I used 41 x 35 kg bags of pre mixed concrete that is 30mm± thick, about 14.2 m². Actual cost was €190 because we under estimated the concrete coverage but still a LOT cheaper than buying ready mixed concrete :cool: :cool:

Vern, the base is shuttered with timber that has a slight give in it on 2 sides. There is a one piece plastic membrane inside and re-bar over the majority of the central area. The white cable is indeed an electrical cable in a trunking, laid under the membrane in a floor channel. It is for power to my saw and router tables and chop saw.

Rather than take everything out of the workshop I decided to just install the new floor in the centre, leaving the benches round the edge on the old floor. Anything stored under them sits on pallets anyway so there is no problem with damp in the winter.

Re: WORKSHOP REFIT...............

Posted: Fri Oct 16, 2015 1:56 am
by Aughnanure
Well done, Sir!!

and I still won't post pics of my (junk) shop.

Re: WORKSHOP REFIT...............

Posted: Fri Oct 16, 2015 2:46 am
by DuncaninFrance
:lol: :lol: :lol:

On another tack Eoin, can you help ID the writing on the M-H here http://www.milsurpafterhours.com/bb/vie ... =3&t=11897

Re: WORKSHOP REFIT...............

Posted: Tue Oct 20, 2015 2:09 pm
by DuncaninFrance
Well, as I can't paint the floor for another 6 weeks I have put the machinery back and cast my first ammo for a long time..... .69" ball for the cannon. Managed about 50 rounds before my arm gave out and I had to stop. :evil: :evil: :evil: :evil:

Image

Image

Re: WORKSHOP REFIT...............

Posted: Fri Oct 23, 2015 1:34 pm
by Dutch Mosin
Fantastic workshop Duncan.
Wish I had a room like that.
I have to wait for good (dry) weather before I start casting and we don't have many dry days in this country. :(

Met vriendelijke groet,

Martin :NET:

Re: WORKSHOP REFIT...............

Posted: Sun Nov 29, 2015 5:58 am
by DuncaninFrance
Final job to finish the workshop started today. PAINT THE FLOOR.......................
Never take the wife with you when you choose floor paint :shock:

Satin Grey on 6 week old concrete is impossible to see where you have painted and where there are holidays :roll:
Going to buy some Red colouring to mix with the second coat which should be done on Wednesday.
Then it is finished :bigsmile:

Re: WORKSHOP REFIT...............

Posted: Mon Dec 07, 2015 6:05 pm
by DuncaninFrance
So I bought some GREEN paint colouring and mixed it with the Grey.......well the floor IS green but the green didn't mix in as well as I thought, still it's now sealed.
Tools back in tomorrow and then lots to catch up on :lol: :lol:

Re: WORKSHOP REFIT...............

Posted: Mon Dec 07, 2015 6:20 pm
by Niner Delta
Maybe you should have just planted grass.......... :mrgreen: :mrgreen:

Re: WORKSHOP REFIT...............

Posted: Mon Dec 07, 2015 7:27 pm
by Niner
"The grass is always greener over the septic tank"

Oh well who cares if one part is greener? You aren't trying out for a spread in House and Gardens magazine. :bigsmile: