For the past six months or so, I've been using .338 bore brushes for my 7.62x54R and .303 Brit's. The .30 cals were a little loose....so I picked up the larger diameter...and SHAZAM! It's a little snug, but not where you have to lean on the rod. It does a much better job of scouring the .310 to .312 bores than the .308. Just an FYI...
<p>wh12725
LECS 03C1016
Screwy bronze brush usage!
Moderator: Aughnanure
Screwy bronze brush usage!
wh12725
LECS 03C1016
LECS 03C1016