"T" coded Longbranch's ?

This is a forum for topics relating to all classic bolt action British design long arms.

Moderator: joseyclosey

drhiller
Posts: 5
Joined: Wed Jun 02, 2004 11:46 am

"T" coded Longbranch's ?

Post by drhiller » Tue Jul 13, 2004 1:45 am

I was at the range today, and an acquaintance was there with a few Enfields.





One is for sale - though he wants quite a bit for it.





Its dated 1950 and its marked Longbranch and had a "T" on the left receiver - which he states made it a sniper variant. I can't tell if its a bubba job or not.





Someone ground off the rear battle sight and added a large - clunky - wooden cheek piece. It has holes tapped on the side of the receiver.





Its got most of its blue (though its a little thin) and a very good looking bore. The cheek peice makes it kind of unique and the rest of the stock looks unmolested.





No optics with it.





It grouped well (2x2) with the South African .303 he was shooting.





Insight? Thoughts on a fair price?

<p>Take care,


David


****************</p><i>Edited by: <A HREF=http://p089.ezboard.com/bmilsurpafterho ... rhiller</Ahttp://img44.photobucket.com/albums/v13 ... tardrh.jpg[/pic] at: 7/12/04 11:49 pm

</i>
ajcarey
Regular visitor
Posts: 70
Joined: Tue Sep 09, 2003 11:31 am
Location: Central Maryland

Re: "T" coded Longbranch's ?

Post by ajcarey » Tue Jul 13, 2004 7:17 am

David,





Personally, I would pass on it if he is asking a higher price for the "T". The ex-Russian MN91/30 sniper rifles are just MN 91/30's without the optics and they still have all of the rest of the kit unmolested and sell for regular 91/30 prices.





That is my take. Our British contingent will probably have a more authoritative say on the matter.





aj




<p></p><i>Edited by: <A HREF=http://p089.ezboard.com/bmilsurpafterho ... ajcarey</Ahttp://img4.photobucket.com/albums/0603 ... 02dInf.jpg[/pic] at: 7/13/04 5:18 am

</i>
KevinP In UK
Posts: 17
Joined: Tue Apr 27, 2004 3:01 pm

Re: "T" coded Longbranch's ?

Post by KevinP In UK » Tue Jul 13, 2004 9:44 am

Hi all,





This what a No4T loks like with out te scope mount:-





http://pic3.picturetrail.com/VOL14/1344 ... <!--EZCODE IMAGE END-->





http://pic3.picturetrail.com/VOL14/1344 ... <!--EZCODE IMAGE END-->


4T markings





http://pic3.picturetrail.com/VOL14/1344 ... <!--EZCODE IMAGE END-->





I paid a little over the top for mine, but not by much. The bore is good and the wood is new beech, I am currently having the Bech replaced with walnut and porper Military bedding down and the new beech wood was not fitted correctly. When it's al done it should be a fine accurate rifle<!--EZCODE EMOTICON START :) --><img src=http://www.ezboard.com/images/emoticons/smile.gif ALT=":)">;





Oh not all No4T's were issued with scopes it seems;)





Does that help?

<p>Best Regards. KP





Don't let the bastards grind you down!
drhiller
Posts: 5
Joined: Wed Jun 02, 2004 11:46 am

Re: "T" coded Longbranch's ?

Post by drhiller » Tue Jul 13, 2004 9:58 am

Kevin:





Yep, that seems right - though the one I saw has seen some more handling than yours.





So that cheek piece is part of the package? Shows what I know. :lol:;





The scope mount and optics are missing. I guess the rear sight was pulled for the scope?





So - dollars, Euro's, pound-sterling, what's a low-ish fair price for a Mark 4T?

<p>Take care,


David


****************
KevinP In UK
Posts: 17
Joined: Tue Apr 27, 2004 3:01 pm

Re: "T" coded Longbranch's ?

Post by KevinP In UK » Tue Jul 13, 2004 11:46 am

Hi drhiller,





Well I paid £375 for mine, which as I say is possibly a little high. I just looked through Gunmart and a normal No4 can be had for about £165 upwards, but I cannot of course see condition in an advert! However I was pleased with the bore condition and it doesn't shoot too badly at all, trouble was as it got hot the group walked up the target which is why I looked at the fore end and the way it was fitted. It doesn't have the cheeck piece on it at present as I replaced the Savage Birch butt with a new Walnut one, it was when I took it in for the bedding to be looked at that the man suggested that it should be fitted with walnut wood up front as well to help with the restoration.





It had been re-parked/blacked when I got it as apparently it was in real poor shape from storage in some sub/tropical place which is why it was fitted with new wood the original stuff was rotten<!--EZCODE EMOTICON START :o --><img src=http://www.ezboard.com/images/emoticons/embarassed.gif ALT=":o">; Oh I paid another £25 for the field patt sling that's on it. One day when I am rich I may try to get a scope and mount, however for now I will shoot it as is. Yes the battle sight ring was ground off to clear the scope. Acording to an armourers information sheet I have here the Wooden cheek piece was fitted to suit the individual user so there is no correct position for this and it's possible to have more than one set of holes in the top of the butt, if done by an armourer properly the surplus holes are filled with a dowl.





Here is the first group I shot with it, it's made up of several types of different surplus ammo, the foresight was way too low so I had to get a higher one. Which is why the group is up of the target:_





http://pic3.picturetrail.com/VOL14/1344 ... <!--EZCODE IMAGE END-->


That's 30 rounds there!





http://pic3.picturetrail.com/VOL14/1344 ... <!--EZCODE IMAGE END-->


Another try after changing the foresight blade to a higher one. Again another 30 shot group of normal milsurp MkV11 for comparision. I believe that the black is about 9" in diameter to give you an idea of scale the Bull is 2" as it's a 200 Yd NRA Std target.





Now with the bedding sorted (hopefully get it back soon) I can sort out some decent ammo for it and see how it really shoots;)

<p>Best Regards. KP





Don't let the bastards grind you down!</p><i>Edited by: <A HREF=http://p089.ezboard.com/bmilsurpafterho ... nuk>KevinP In UK</A> at: 7/13/04 9:52 am

</i>
User avatar
dromia
Moderator Emeritus
Posts: 1843
Joined: Tue Aug 26, 2003 1:37 pm
Location: UK
Contact:

Re: "T" coded Longbranch's ?

Post by dromia » Tue Jul 13, 2004 5:01 pm

David,





any chance of some pictures, the date seems a bit late for a Long Branch 4T conversion.




<p>http://www.photobucket.com/albums/1003/ ... _Badge.gif" style="border:0;"/><!--EZCODE IMAGE END-->





Adam.





Why don't you visit .





ImageImage
drhiller
Posts: 5
Joined: Wed Jun 02, 2004 11:46 am

Re: "T" coded Long Branch's ?

Post by drhiller » Tue Jul 13, 2004 7:07 pm

Dromia:





I'll bring my camera next time I go to the range.





E-mailed him this morning to confirm my interest and request more details. He replied that it was a Canadian sniper rifle and that they were in production until 1955. Does this help?





Too many versions of these things, damnit!

<p>Take care,


David


****************
User avatar
bradtx
Contributing Member
Posts: 188
Joined: Mon May 10, 2004 10:48 am

Re: "T" coded Long Branch's ?

Post by bradtx » Sat Jul 24, 2004 10:53 am

"Too many versions of these things, damnit!"-David





Not only that, there were perhaps three different versions of the Canadian (T) rifle!





Regards,





Brad

<p>
feedbackboy
Posts: 1
Joined: Sun Aug 01, 2004 6:03 pm

JC to the UK.

Post by feedbackboy » Sun Aug 01, 2004 6:03 pm

Kevin,





Hiya Mate!





Nice to see you No4 above.





As posted on another thread, I hope to get my No5 this week - an import from the US.





Blind puchases are not usually my style - fingers crossed?





Will post you some pics via email when I can ffinally claim it.





Feed.





:loco:;




<p>
User avatar
krinko
Contributing Member
Posts: 158
Joined: Wed Mar 17, 2004 12:38 am
Location: Nebraska

Re: JC to the UK.

Post by krinko » Sun Aug 01, 2004 6:11 pm

Feed,


Good luck with that JC---I hope it shoots well enough to justify the trouble.


After it arrives, are you going to shoot that match over you-know-where?


It's not moving much, for an international type shoot---your's was much better.


-----krinko

<p>
Freudig wie ein Held zum Siegen
Post Reply