A large lead ladle
Posted: Sun Jan 17, 2010 6:56 am
I may have posted this on the old forum, but here goes again.
The ladle is made from 2" x 1/4" mild steel strip.
This is bent round.
Then welded and a bottom welded in using scrap strips.
View from the top.
On the fire (forge).
A couple of pouring spouts were hammered in. It works well. Heavy when full though! !
The ladle is made from 2" x 1/4" mild steel strip.
This is bent round.
Then welded and a bottom welded in using scrap strips.
View from the top.
On the fire (forge).
A couple of pouring spouts were hammered in. It works well. Heavy when full though! !
