Milsurp Marathon Match 7/1 - 9/30 2005
Moderator: Niner
No rush to know and I am not sure I will be able to shoot them before end of Sept anyway.... too much other shooting!
Just thought it might be fun to shoot with my Enfield.
What are the scoring ring sizes on the target? The one I have ready access to is the ISSF 50m target. 50mm dia 10 ring and other rings at 25mm spacing. (nb 1" = 25.4mm).
David
Just thought it might be fun to shoot with my Enfield.
What are the scoring ring sizes on the target? The one I have ready access to is the ISSF 50m target. 50mm dia 10 ring and other rings at 25mm spacing. (nb 1" = 25.4mm).
David
David Minshall - www.researchpress.co.uk
Firearms, long range shooting and associated history
Firearms, long range shooting and associated history
- blackisler
- Moderator Sponsor 1911,12,13,14,15,16
- Posts: 503
- Joined: Fri Nov 12, 2004 4:04 pm
- Location: Scotland
- Contact:
David,
For those who wish to participate and do not have ready access to NRA 100 Yard Small Bore Rifle Targets, you can roll your own. The dimensions are as follows:
Full target is 14 inches x 14 inches.
X (center) ring - 1 inch diameter 1/2 inch radius
10 ring 2 inches 1 inch radius
9 ring 4 inches 2 inch
8 ring 6 inches 3 inch
7 ring 8 inches 4 inch
6 ring 10 inches 5 inch
5 ring 12 inches 6 inch
1 inch - 2.54 cm
You can also go to the following link and download the a suitable target in a pdf file that can be printed using Adobe Acrobat Reader. Be sure to set Print Scaling to None when printing this file.
http://www.surplusrifle.com/reviews/lil ... target.pdf
Sgt Jethro
For those who wish to participate and do not have ready access to NRA 100 Yard Small Bore Rifle Targets, you can roll your own. The dimensions are as follows:
Full target is 14 inches x 14 inches.
X (center) ring - 1 inch diameter 1/2 inch radius
10 ring 2 inches 1 inch radius
9 ring 4 inches 2 inch
8 ring 6 inches 3 inch
7 ring 8 inches 4 inch
6 ring 10 inches 5 inch
5 ring 12 inches 6 inch
1 inch - 2.54 cm
You can also go to the following link and download the a suitable target in a pdf file that can be printed using Adobe Acrobat Reader. Be sure to set Print Scaling to None when printing this file.
http://www.surplusrifle.com/reviews/lil ... target.pdf
Sgt Jethro
Code: Select all
Does this mean that I can use my recently acquired Hawken coal burner Exclamation
Sgt Jethro
P.S, We may have a BP match later on if there is enough interest.
David,
The BP shooting will be offhand. I have made alterations to the rules to make this point clear. I was thinking about making an exception for Adam which would allow him to shoot whilst bent over facing away from the target. I decided not to make that exception since it would amount to creating a cannon class.
aj
The BP shooting will be offhand. I have made alterations to the rules to make this point clear. I was thinking about making an exception for Adam which would allow him to shoot whilst bent over facing away from the target. I decided not to make that exception since it would amount to creating a cannon class.

aj
- joseyclosey
- Moderator
- Posts: 3918
- Joined: Mon Oct 06, 2003 2:48 pm
- Location: UK
- Aughnanure
- Moderator
- Posts: 3197
- Joined: Wed Jun 22, 2005 5:59 am
- Location: Glen Innes, NSW, Australia
Finally fired for Score
I haven't been reading things properly but I'll be in this. I do like having a choice of positions
Here's what I'll use No1 Mk III*
All original, been to India but not Isshy Screwed
.
http://img.photobucket.com/albums/v174/ ... C00184.jpg[/pic]
Eoin.
Not so good
29/8/2005
Managed 58 at 50 yards off-hand, miserable day, raining off and on (mainly on) and gusty wind,------ winge, whine etc., etc., But as the wind was straight behind me it didn't make any difference. Bit like summer in Scotland

All original, been to India but not Isshy Screwed
.
Eoin.
Not so good

Managed 58 at 50 yards off-hand, miserable day, raining off and on (mainly on) and gusty wind,------ winge, whine etc., etc., But as the wind was straight behind me it didn't make any difference. Bit like summer in Scotland

Last edited by Aughnanure on Wed Sep 28, 2005 11:27 pm, edited 2 times in total.
- blackisler
- Moderator Sponsor 1911,12,13,14,15,16
- Posts: 503
- Joined: Fri Nov 12, 2004 4:04 pm
- Location: Scotland
- Contact: