It has had the treatment and every bit of it, except the internals has suffered.
The barrel had a sporting ramp foresight electrically welded to it and the barrel had been removed and replaced using a Stilson Pipe Wrench.
The forend is missing but the butt is there and useable after the extended comb was removed.
![Image](http://img.photobucket.com/albums/v174/Flaith/Junkle%20Carbine/8eccec9f-299c-4b29-9e0b-8d716e79824e_zpsa58164e0.jpg)
With the barrel shortened and a No I foresight block fitted.
![Image](http://img.photobucket.com/albums/v174/Flaith/Junkle%20Carbine/b03e9281-551e-4b2d-a374-2f84d109189a_zps75ed402e.jpg)
Showing the mods to the body, wrench marks on the barrel and vyce jaw impression on the butt stock.
![Image](http://img.photobucket.com/albums/v174/Flaith/Junkle%20Carbine/650f6e5d-4a90-4349-a82a-f66bc97dc6e6_zps1f90e1de.jpg)
Close up of the body, the holes were to mount a scope base and will be utilized to mount an aperture sight.
The action retaining pin hole has been drilled ahd there was a bolt holding things together.
![Image](http://img.photobucket.com/albums/v174/Flaith/Junkle%20Carbine/849e48e3-710f-472c-ad2d-62ce83c9fa2c_zps16e6a656.jpg)
Rere of the body shewing the off centre and downward slanting hole that was drilled to allow cleaning from the back.
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Image](http://img.photobucket.com/albums/v174/Flaith/Junkle%20Carbine/DSC02027_zps9fed4b9d.jpg)
Off centre hole that had a leather thong tied through it (sorry the focus is off).
![Image](http://img.photobucket.com/albums/v174/Flaith/Junkle%20Carbine/54728e55-eb5a-4666-8b65-793d83551fbb_zpsfea6f9ef.jpg)
The stock butt had had a raised comb added.
The butt is useable but will need filling and a butt plate fitted.
The bore, surprisingly is very good but the electric welding had affected accuracy.
I will make a new forend out of a bit of scrap or I might laminate one out of plywood,